- 風量測試臺
- 甲醛/VOC釋放艙系列
- 塑膠跑道VOC釋放艙系列
- 步入式環境試驗室系列
- 甲醛釋放氣候艙
- VOC環境釋放艙
- 高低溫（濕熱）試驗箱系列
- 汽車整車VOC環境測試艙
- 三綜合試驗箱
- 溫濕度檢定箱
- 冷凝組分測定儀
- 光伏板溫度系數試驗裝置
- 藥品穩定性試驗箱（室）系列
- 稱重試驗箱系列
- 焓差試驗室系列
- IPX防水/防塵試驗箱系列
- 紫外/氙燈類試驗箱系列
- 非標定制試驗箱系列
Technical Proposal 技術指標
1 Product use/上海VOC氣味環境測試艙的用途:
VOC odor release tank is mainly used to examine and determine the car inner decoration, electrical, electronics, leather and other products under the condition of high temperature storage and the smell of practical release, odor detection, etc.
VOC氣味釋放艙主要用于考核和確定汽車內飾件、電工、電子、皮革等產品在高溫條件下貯存和實用的氣味釋放、氣味檢測等。
2 Reference standard/上海VOC氣味環境測試艙的參考標準:
●GB/T 2423.2 2001 test B: high temperature experiment method.
GB/T 2423.2-2001 試驗B：高溫試驗方法。
●QJQ 1105202010 auto interior materials smell test method
QJQ 1105202010 汽車內飾材料的氣味性測試方法
●GJB 150.3-1986 high temperature test
GJB 150.3-1986 高溫試驗
●QB/T2725-2005 "determination of the leather smell"
QB/T2725-2005《皮革氣味的測定》
●IEC68-2-2 test B: dry heat.
IEC68-2-2 試驗B：干熱.
●GB 11158 "high temperature test chamber technology conditions".
GB 11158《高溫試驗箱技術條件》。
●GB/T 2423.2 "electrical and electronic products environmental test procedure test basic B: high temperature test method.
GB/T 2423.2《電工電子產品基本環境試驗規程試驗B：高溫試驗方法》。
3 上海VOC氣味環境測試艙的箱體結構
|
body material箱體材質 |
The outer wall material: 1.2 mm steel plate of the lacquer that bake The lining material: 1.2 mm mirror stainless steel plate 外壁材料：1.2mm鋼板烤漆 ; 內壁材料：1.2mm鏡面不銹鋼板 |
|
Heat preservation material保溫材料 |
Clean glass fiber.潔凈玻璃纖維. |
|
sealing performance密封性能 |
Door seal USES the world invention patent technology, Box sealing with Zero releaseEnvironmental protection four fluorine material seal 艙門密封采用世界發明**技術，箱體密封性采用0釋放環保四氟密封 |
|
Enclosure door箱體門 |
Double open the door雙開門 |
|
body heat箱體加熱 |
Finned stainless steel heating tube翅片式不銹鋼加熱管 |
|
test leads hole測試引線孔 |
Standard size of 50 mm, can customize according to customer's requirements.標準尺寸為50mm，可以根據客戶要求定制。 |
|
power箱體電源 |
380 v three-phase five wire system380V三相五線制 |
|
body other configuration箱體其他配置 |
1, the box body is equipped with standard cable 8 meters 2, equipment random equipped with three layers stainless steel shelves, such as the need to increase, indicate. 箱體配備標準電纜線8米.設備隨機配備3層不銹鋼擱架，如需增加，需說明。 |
|
Equipments free provide third party test report. 設備免費提供第三方溫度檢測報告。 |
|
4 Measurement and control system/上海VOC氣味環境測試艙的測控系統：
Real-time monitoring, temperature, humidity, pressure, flow rate of the record hold control parameters, the replacement rate, time, etc. Controlled by touch screen as the personnel operating equipment dialogue interface, intuitive and convenient. Special control configuration software, in addition to achieve the function of the touch screen, also has the function of remote control, it is possible to realize the control system, program setting, dynamic data display and historical data playback, fault recording, alarm Settings, and other functions.
實時監控、記錄艙內的溫度、流量、時間等控制參數。采用觸摸控制屏作為人員操作設備的對話界面，直觀、便捷。配置專用控制軟件，除實現觸摸屏的功能外，還具有遠程控制功能，可實現系統控制、程序設定、動態數據顯示和歷史數據回放、故障記錄、報警設置等功能。
5 Security Protection System/上海VOC氣味環境測試艙的**保護系統:
7.1The Switch cabinet incorporates the complete electrical section with fuses, protection, switches, control, and regulation appliances;
所有的電氣部分包括保險絲、保護開關、控制器以及相關的調節器件都集成在電氣柜中
7.2Lack or reverse of power phase protection/電源斷相及逆相保護
7.3Over temperature protection of heating zone/加熱區過溫保護
7.4Emergency button/急停開關
6 Equipment Working Condition/上海VOC氣味環境測試艙的設備工作條件:
Ambient Environment/環境要求:
●Ambient temperature/環境溫度：+5℃～+35℃;
●Relative humidity/相對濕度：≤80%RH;
Power supply/電源要求:
●Power voltage/電壓: AC380±10%V, 3-phase wires + N + G (ground wire protection);
●Frequency/頻率: 50±0.5Hz;
Cooling water supply/氣壓要求:
● 86kPa～106kPa
